Impact Doors

Aluminuim and mild steel

Door Framework

The four framework types shown below range from light to heavy duty. The Superflex, Multiflex and Interflex frames house a vertical spring unit mechanism in the top of each door tube. The Powerflex frame houses a unit in the top and the bottom of each tube. The mechanism is a double action, adjustable tension, torsioned spring unit concealed in the door frame and is virtually maintenance free. The panels shown in the frames below are suggestions only - for the full range of panel options see panels

Superflex

Manufactured from high quality extruded aluminium section, that has smooth lines and no projections. Used frequently within the food industry this is a lighter duty door than others in the range and has the panel fixings concealed within the framework. Suitable for use on internal openings with pedestrian, hand or light powered traffic on openings up to 2400mm wide x 2438mm high.

Multiflex

Manufactured from 43mm o/d heavy wall mild steel steam tube, with a horizontal gusset plate and vertical mild steel flats to hold the panel in position. Suitable for use in many applications, dependent on panel choice. They are ideal for internal openings but can be used on semi-external/external openings dependent on site conditions. They allow access by pedestrian, hand or powered traffic on openings up to 2400mm wide x 2600 high.

Interflex

Manufactured from 60mm o/d heavy wall mild steel steam tube, with a horizontal gusset plate and vertical mild steel flats to hold the panel in position. Suitable for semi-external/external openings dependent on site conditions, for use by pedestrian and powered traffic. Offering a heavier duty construction than the Multiflex and Superflex these doors are suitable for use on openings up to 3000mm wide x 3350mm high. N.B. On openings above 2600mm wide the triangular gusset plates will be replaced by horizontal top tubes.

Powerflex

Manufactured from 60mm o/d heavy wall mild steel steam tube with a horizontal top tube, vertical mild steel flats and a corner gusset plate to hold the panels in position. Suitable for heavy duty external applications, with powered traffic. Powerflex doors are suitable on openings up to 4000mm wide x 4000mm high and many extras are available to increase the specification on the door framework and panels. i.e. Horizontal spring unit mechanisms, dome disc protection studs, wearpads, increased overlap, larger clamping flats etc. N.B. On doors below 2600mm wide the horizontal top tubes will be replaced by triangular horizontal gusset plates.

Door Panels

Choosing the correct door panel type can extend the lifespan of your flexible crash doors. Please get in contact to discuss our vairety of different impact doors.